keflex for impetigo

A Custom Made Dining Table – The Journey

Here are all the nitty gritty details of the journey to having our beautiful new custom dining table (pictured below) today, including our bumps and bruises!

It’s a little long, so grab a cup of coffee and a seat.

Table-067

Let’s just start by quickly addressing the elephant in the room.  You are probably thinking, doesn’t “custom” mean expensive?  It doesn’t have to…  and surely does not in my case.  It was actually a way to get a look I wanted for less.  Read on.

Old Table

Our last dining table (pictured below) had been damaged in the move from AZ to TX.  Thankfully, we were able to get a claim check from the moving company since we had insurance.  That meant we needed to replace it for the claim amount.

Kitchen_2011_002

Though I loved that table, it was fine with me since I wanted to eliminate my black furniture anyway and go for an overall lighter look at the new house.  But, that meant we had a budget and needed to find a new one in that price range.

On a bit of a side track, our old dining room in AZ was really the dining and breakfast area all in one.  There weren’t two separate spaces.  But, here in TX, we have a breakfast room and separate formal dining space as well.  The breakfast room is below.

And, our separate dining space.  It’s pretty blank…  This is prior to us receiving the new table.

In this photo, the footprint of the table is marked off with painters tape.

Inspiration

What style should we go for?  I love mixing rustic with chic and knew I wanted a rustic farmhouse style table.  Yet, not anything too trendy.

Of course, the tables that I loved cost way too much.  I really fell in love with this one at Restoration Hardware.   It is not only is it a cool design, but it’s classic and can be paired with so many things.

image

But, at $2995 for a 9 ft table, that was way out  of my budget.  Way out.

Custom Table for Less

The next thing I knew, I saw this table on our local Craigslist for a fraction of the price.

image image

Pretty similar, right?  I ordered it to be made.

Stain Issues

He made it in a week (fast), but put the wrong stain on it and it turned out pretty purple.  Not at all what I wanted.  He created his own custom stain.  Well, once you stain something, it’s tough to undo.  So, you’re safer trying it on a scrap piece of wood first if it’s new to you, and then getting the customer’s approval.

image

Needless to say, we turned that table down.  I’ve learned not to compromise if it’s going to always bother you and it’s not what you ordered.

He tried to remedy the stain by essentially painting it a tan color and put it up for sale.  He then came by with a table, so we could see how it would fit in our dining room.  Never hurts to double check measurements and all.  Looks pretty good in the space.   We gave him the green light to start fresh on a new table.  We’re on board, as long as the stain is right.

table2

He left, and as usual, was very hard to reach by phone or email.   (Nice guy, though.)  When having custom work done, you need to be sure to work with people who are available and easy to contact (more tips later).   Unexpectedly, a few days later, he informed me that he was not going to build it.  No real reasons. Great.  So, back to the drawing board.

All of that long back story to show you how we got to where we are…

Finding a New Table Maker

I saw the table below on Craigslist and asked this artisan if they could make one more similar to our inspiration table from Restoration Hardware.   I love the general design below, but had my heart set on the other style.

image

They said of course they can!   Yay.  Best thing about it?   It’d cost less than a third of what the inspiration table costs.  Custom can be less expensive and make your vision possible!  How?  They have a lot less overhead than a larger manufacturer (offices, warehouses, trucks, transport, machinery, workers).  And, a store isn’t tacking on an additional cost on top of it.

One thing I loved about the table above and wanted to keep was the detail like the bolts and brackets – the hardware that shows.  Great little touches.

We met them in person, looked at their work and agreed to start a custom project together.   They are an absolutely adorable young couple!  They own Mason’s Woodwork.  Check their website out.  It’s a new small business and I love supporting small businesses, especially if they do good work, have good prices, and their customer service impresses me – then I’m very loyal.

Measurements and Details

I sent them my inspiration photo and the measurements that I wanted.

It was the beginning of April and with their work schedule at their regular jobs and travel, it’d be mid-June before the table was ready.  Not as fast as the other table, but that was fine with me.

I could tell they’d be much more responsive than the other guy which was comforting, as that had been a headache.  When doing anything custom, it requires a lot of communication, agreeing on measurements and photos along the way.  Both parties need to be available to one another.

We wanted a table that could fit up to 10 people if necessary, that fit in our dining room well, and that was wide enough that we could easily put a centerpiece or food in the middle while place settings are on the table.

Here is a diagram of approximately what we wanted.

image

But, I also wanted to more often just seat 8 with plenty of space, sort of like this table, but ours would be longer by 9 inches.

image

Width – 43.75 inches –  I told them my ideal width.  They advised the exact width and in the end, we went with their advice, as it made sense and we agreed.

The top of the table is constructed with wood planks and that means the width of the planks dictate the possible widths of the table.  Each plank is a little over 9 inches, so you could do 37 inches across or 46.  Well, 46 was pretty wide. So, we chose to do three wider planks and two more narrow planks between, with a border, making it 43.75 inches across in total.

Length – 107 inches – The length was determined by the number of people we wanted to seat and the space.  We wanted to not go too long so you could still easily walk around a chair if it was pulled out away from the table.

Height – 30 inches is standard for a dining table.

The other measurements that are important are the legs.  How far between the  table legs?

How wide are the legs is important for this design.   We knew we wanted their width to be proportional to the top of the table.  Similar to the inspiration table in proportion, yet of course, a tad wider due to our tabletop being a tad wider than the inspiration table.  If they are too narrow, the table will appear to be top heavy.

Communication Breakdown and Tweaks

This is where communication began to break down a little.  I asked how wide the legs would be, twice.  No precise information, just “trust us.”  As I decorator, I hate that phrase because my vision and what I had in mind may be different than their version of what works well.   It’s not to say they are not trustworthy or good at what they do, we just all have different ideas and visions in mind and it’s not until it’s put to paper that we see if we are on the same page.

It is important to spell out every aspect of a custom design out.   Discuss every measurement and then have all parties sign off on it before anything is actually executed.

This process may even result in you finding that their plan and idea is much better than yours, like on the table top when they suggested the wider boards mixed with the narrower boards!

When I got the next update on the table, it included a photo.  I realized that the legs were already built without going over any measurements!   Eek.

image image

You can see the disproportion in the photos that were sent at that stage.  Up until then, all measurements had been agreed upon prior to work being done and photos sent along the way.   They had done a superb job.

Though the table looked great in general, the legs were a little too narrow for the top.

It was at this point that I called Restoration Hardware to get their measurements so I can check their proportion and compare.

Their general measurements were:  108 L x 42 W x 30 H

Close to ours.  Very close.  Ours are 107 L x 43.75 W x 30 H

The width of their legs?  38 inches.

So, their legs were two inches shy of the edge of the top on each side.  That means that though our table was 1.75 inches wider than the RH table on the top, our legs were 4.25 inches narrower than theirs.  See, proportion problem.  Though the width of our table increased from the inspiration photo, the width of the legs decreased.  That would have to be remedied, especially since these dimensions were not discussed ahead of time.

We ran the math and concluded that in order to be the same proportion as the inspiration table from RH, our legs needed to be 39-40 inches wide at the bottom.  We decided to be as gracious as possible and just ask that the actual horizontal feet be replaced at a wider width.

After getting actual leg measurements post leg build, we sent this diagram to illustrate our point and show exactly what we wanted, and ask that the feet be redone now that we’ve discussed measurements.

Sometimes things are best explained in images.  And, it’s probably better to over-communicate in this scenario.

clip_image001

Lengthening the bottom foot should do the trick.

Just to make certain we communicated clearly, we also did a really rough photoshop rendering to show the difference the change would make.   The first image is the new longer feet versus the original size in the second image.

clip_image001 clip_image001[4]

They agreed to the changes for the foot and set out to remake that one portion of the table.  Yay!!  What a relief.  You never know how people will respond and how great their customer service will be.

Another Bump in the Road, But Turned Out to be Good

At this time, we also got the actual measurement of the width between the table legs.  Come to find out, the finished measurement was 67 inches, rather than the 70 inches that we all agreed upon.  It had been changed, but not told to us.  Eek.

Now, really, that was a good thing.  Why?  Well, when I rechecked that measurement, I realized that I wanted them closer.   In fact, 65-70 inches apart would have worked, in different ways.   I think 67 inches may be ideal.  So, that turned out to be a good thing, since I wouldn’t have felt right changing agreed upon measurements once work had begun.  But, this is why you work together and tweak things based on your needs/ desires and their expertise.

If you are thinking about using them, don’t let this dissuade you.  I just want to be transparent about the process, but I think we all learned a few things along the way and I always think that each project I do makes me better.  I think the same is true for them!

Stain

Next decision?  The stain!  What color?  I purchased and tried out a few stains on scrap wood that we got from them.  That way, we could see exactly how it would look on the table.

In the end, we went with the stain seen below (Early American).  It’s sometimes easier to just go with something they have done before than something new.  That way, the end result is more predictable for all of us.

image

Almost Done!

The next update photo I got was with the new feet, the stain and the fun hardware!

image

Looking good!   And, a few days later, here it is in our home!

Table-087

Aren’t we glad we didn’t end up with the one we almost got?!

table2

Conclusions

Overall, it turned out great.  I like it so much better than the other table that we almost got.  It’s such a close match to the Restoration Hardware table that acted as our inspiration, yet unique.

Table-067

Ours is also 1.75 inches wider on the top.  The Restoration Hardware table has a brass sheet with a zinc finish on the top.  Ours is all wood and has the metal brackets and bolts.

Turns out, we stayed in our budget and got a look-alike for a lot less, that fits our new house better than a square table would have!

Check out their website and consider ordering a table from Mason’s Woodwork!  Check them out on Facebook as well.

Now to actually decorate the formal dining room.

What do you think of the table and process?   We’re excited to have a dining room table again.  We love it!  Have you ever had a custom table made?  Would you ever?  Tomorrow I will share some tips for having custom pieces made.

kristysig

4 Comments :

  1. Wow!! It’s just beautiful and looks awesome in the space.

  2. It was so worth waiting for. This was a very informative (but I did feel your pain) post. Thanks for sharing.

  3. Your perfection with detail made this a resounding success Kristy! Gorgeous. My table was a rustic semi-custom and is round in shape. Almost exactly the same stain as yours. I remembered your black table when we viewed your home in AZ. Loved that table too but this new one is a big winner! I’m sure you will have some wonderful meal sharing at this one.

  4. Your table is absolutely stunning! I love the way it looks with the more modern chairs!

Post a Comment

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>